products

Ball valve API ESDV Pneumatic Off Valve actuated ball valve Wear-resistant ceramic ball valve air actuated

Basic Information
Place of Origin: China
Brand Name: veson
Certification: ISO CE
Model Number: VSF
Minimum Order Quantity: 1
Price: EXW Fob shanghai
Delivery Time: 6-8 weeks
Payment Terms: L/C, T/T
Supply Ability: 10000
Detail Information
Material: SS CS Shut Down Valve: ESDV
Color: Red Operation: Pneumatically Or Hydraulically
Key Words: Emergency Shutdown Valve Media: Oil
Type: FPBV
High Light:

ESDV Pneumatic Emergency Shut Off Valve

,

36" Emergency Shut Off Valve

,

API 607 Emergency Shutdown Valve


Product Description

Pneuamtic On-Off ESDV Type 6" – 36” Ball Valves

 

The function of the shutdown valve is to shut-off the fluid flow inside the fluid flow line or pipe when an emergency that leads to a hazardous situation comes. It is an actuator operated valve mainly used for safety purpose that is why it is called Emergency shutdown valve. It is also known as the shutdown valve or SDV, ESDV, ESV, ESD

 

 

It is very important that every instrument engineer must know where the shutdown valve is installed, what fluid flow through it and what standard is used as the design reference. These shutdown valves are commonly used in oil and gas field in order to reduce the escalation of hazards from one system to other.

 

shutdown valve features :

i) Tie Shut Off

  • a shutdown valve must possess Zero/minimum leakage. Generally, it should pass the seat leakage testing as per API 508 and/or ISO5208.

ii) Fire-safe

  • shutdown valve must work even though it is exposed to external fire attacks. Thus, shutdown valve body shall be fire-rated according to API 607 for soft seated valve or API 6FA for API 6A & API 6D valves or BS 6755 Part 2.

iii) Fast action (From Full Open - Full Close)

  • The actions of the shutdown valve must be fast. A quarter ball valve is best for quick action. According to thumb rule, shutdown valve shall be able to close within 10 seconds of activation, and time taken from Full open to Full Close must be within 1-2 seconds per inch of shutdown valve size. Therefore, proper selection and sizing of the actuator must be ensured and all requirements must be fulfilled.

iv) Minimum passing (when closed)

  • This feature is needed to minimize the potential of the overpressure of a low-pressure system and spurious trip. A shutdown valve with equal% characteristic (most ball valve will have this feature. However, this shall be confirmed with valve supplier) is the preferred type. With equal% characteristic, it can operate with 10% valve closure give 20% flow reduction, 20% closure give 50% closure.

v) Minimum disturbance/turbulence to process fluid

  • This feature is to minimize unnecessary energy lost. Reduced Bore (RB) ball valve having a hole in the middle would minimize flow direction change and turbulence. Full Bore (FB) ball valve virtually like a pipe- significantly minimize energy lost.

vi) Fail-safe

  • A shutdown valve actuator shall pneumatic/hydraulic fail-safe spring-return type. If a shutdown valve fails to close electrical driven type shall not be used.

vii) Manual field reset

  • A shutdown valve must manually be operated at the site. The operator shall ensure that the system is clear and safe and also, can be reset on site. No remote reset is allowed.
  •  
Full Open Position – Normal Operation

The ESDV provides minimal pressure Differential when Differential when the valve the valve is in full-open-open position.
The full bore ball valve virtually acts like a pipe minimizing process fluid turbulence
 
Full Closed Position – Emergency Situation
 
 

Specifications:

  1. Material: SS304/316/304L/316L ( CF8/CF8M/CF3/CF3M), WCB, etc.
  2. Full port
  3. Size: 1/2"~12" (DN15~DN300)
  4. W. P.: ANSI STANDARD: CLASS 150LB~1500LB; DOMESTIC STANDARD: PN10-40; JIS STANDARD: JIS10K etc. (CAN BE CHOSEN)
  5. W. T.: -20ºC ~200ºC (-4ºF~392ºF)
  6. Investment casting
  7. Blow-out proof stem
  8. Anti-static device &Fire proof devide (option)
  9. With ISO 5211 Mounting pad
  10. Design & Manufacture standard: API 6D, API 608, BS 5351.
  11. Flange dimension: ASME B16.5
  12. Face to face: ASME B16.10
  13. Test & Inspect standard: API 598, API 6D.
  14. Pressure & Temperature standard: ASME B16.34
 
 
 

Contact Details
Judy.Zhao

Phone Number : +8618918264392

WhatsApp : +8618918264392